Support for this Vigitronx & Telcoma site have been discontinued
TELCOMA SM2000
Gear motor for industrial sliding gates. SM 2000 is an oil bath gear motor for automation of large-dimension sliding gates up to 2000Kg. The top quality design of individual components (tested separately) make the SM 2000 a gear motor with totally guaranteed safety and reliability.
TELCOMA EVO 600/800/1200
Irreversible electromechanical gear motor for sliding gates. Fitted up with control panel and magnetic encoder, EVO gear motor's series respects the EC safety requirements. The EVO gear motor's series offers a complete versatility, being adjustable in height and depth. Included control panel with cover protection.
**Installation Included**
TELCOMA ACE 400/800
Irreversible electromechanical gear motor for sliding gates. Electromechanical gear motor for sliding gates up to 800Kg. Complete with the safety devices such as encoder, limit switch and built-in control panel, the ACE series represent the future in the automation field.
TELCOMA TEN 1
Reversible gear motor for pedestrian gates. The compact automation for hinged gates with columns 100mm wide and more. The motor is endowed with encoder, adjustable in power and speed. In the full respect of the European normative. Predisposed for "Sun Power" power supply: the power supply system made in Telcoma.
TELCOMA TAG
Electromechanical actuator for residential swing gates with encoder. Equipped with encoder to offer total protection in terms of safety, making them ideal for all types of residential application and reducing the risks of crushing. The pistons in the TAG series are available in stainless steel and aluminum versions to guarantee reliability and durability. Powered at 24 Vdc these units give the entire system optimal safety levels in compliance with CE standards.
RM1,588 **Installation Included** - 2 YEARS WARRANTY ( ONLY DC MOTOR )
RM1,388 **Installation Included** - 1 YEAR WARRANTY
TELCOMA STONE
Electromechanical actuator for residential swing gates with encoder. Equipped with encoder to offer total protection in terms of safety, making them ideal for all types of residential application and reducing the risks of crushing.
VIGITRONX SD2
Driving Method :Rack and Pinion of module 4.
Operating Voltage :DC 18V for normal speed.
DC 12V for ending speed.
Motor Output :30W
Motor Amp. :3.5
Motor Rotation Speed :1800r.p.m at 12V
Normal Speed :25cm/sec linear
Ending Speed :12cm/sec linear
Back-up Battery :12 volt. 7AH Rechargeable
Safety Clutch :Electric current sensing using Hi-Amp Auto-Reverse.
Electric Controller :Microprocessor based.
Safety Barrier :Infrared beam sensor (optional).
Temperature :0 to 80C
Gear Box :Oil bath worm type reducer.
Manual Operation :Special released key for power failure.
Max. Weight of Gate :ONE tone with force adjustable.
Max. Length of Gate :11 meters with 45sec. cut-off time.
VIGITRONX SA1/SD1
Configuration :Single phase induction motor couple with worm gear speed reducer with manual override release clutch controlled by electronic circuitry.
Driving Output :Rack and pinion gear. module 4.
Power Supply :AC 240V 50Hz / 24V DC
Current :5A Max
Motor R. P. M. :AC 1400 / 4200 DC
Duty :50 cycle / hour
Capacity :1200kg. max.
Velocity :10m/min. and 15.5m/min.
Working Temperature :-20C + 80C
Lubrication :Grease type (non oil bath).
Safety Device :Electronic clutch for anti-crushing.
VIGITRONX VG ARM 212/214
Power Supply :230 Vac 50Hz
Motor Power Supply :120 Vdc / 24 Vdc
Rate Power :25 W / 40 W
Rate Current :2.2 Amp / 2.0 Amp
Piston Stroke :310mm
90 Degree Opening Time :10 seconds
Max. Wing Width (with lock) :3.00m
Max. Wing Weight :250Kg
Anti-Crush Safety Device
:Electronic
Vigitronx VG 1
Motor Voltage Rating :15 - 24V Direct Current (DC)
Power Consumption :25 watt per actuator
Motor Rated Load Speed :4700 r.p.m
Insulation Resistance :1 mega ohm
Actuator Output Speed :2.2 r.p.m
Angular Speed :12 - 15 per seconds
Closing Speed :8 - 10 seconds
Max. Leaf Opening Angle :360
Max. Leaf Weight Allowable :200Kg
Casing :Waterproof and rust resistant cast alloy.
Thrust Force :0 - 60Kg
External Dimensions :240mm x 240mm x 140mm
Vigitronx VG Arm 1
Highly recommended Heavy Duty Autogate System with complete Swing Arm Auto gate, medium duty motor suitable for most residential gates. Remote control, Battery backup, Auto safety stop, Lightning resistant. 2 Year Warranty. Highly recommended for trouble free operation.
RM1,188 **Installation Included**
