VIGITRONX SA1 / SD1
Configuration Single phase induction motor couple with worm gear speed reducer with manual override release clutch controlled by electronic circuitry.
Driving Output Rack and pinion gear. module 4.
Power Supply AC 240V 50Hz / 24V DC
Current 5A Max
Motor R. P. M. AC 1400 / 4200 DC$
Duty 50 cycle / hour
Capacity 1200kg. max.
Velocity 10m/min. and 15.5m/min.
Working Temperature -20C + 80C
Lubrication Grease type (non oil bath).
Safety Device Electronic clutch for anti-crushing
VIGITRONX SD 2
Driving Method Rack and Pinion of module 4.
Operating Voltage DC 18V for normal speed.DC 12V for ending speed.
Motor Output 30W
Motor Amp. 3.5
Motor Rotation Speed 1800r.p.m at 12V
Normal Speed 25cm/sec linear
Ending Speed 12cm/sec linear
Back-up Battery 12 volt. 7AH Rechargeable
Safety Clutch Electric current sensing using Hi-Amp Auto-Reverse.
Electric Controller Microprocessor based.
Safety Barrie r Infrared beam sensor (optional).
Temperature 0 to 80C
Gear Box Oil bath worm type reducer.
Manual Operation Special released key for power failure.
Max. Weight of Gate ONE tone with force adjustable.
Max. Length of Gate 11 meters with 45sec. cut-off time.
